Led line light color saturation, hot cold, to adapt to the more demanding installation environment, with carefully designed embedded parts, install more convenient, smooth and firm, later period maintenance cost greatly reduced, and the traditional design of lamps and lanterns has the following advantages:

1. Special protective elements for inductive lightning and ESD are adopted in the professional design, and the performance of the device conforms to the standard test standard of iec61000-4 (Level4).

2, lamps and lanterns surface using 12 mm special UV resistance, prevent slippery full physical tempered safety ground glass or ordinary glass, prevent slippery rank >, impact resistant, friction resistance, the glass surface with high temperature glaze, lamps and lanterns with high temperature inside the glare and UV glazing

3. The advantages of integrating optical decoder and LED lamps into integrated design.

4, integrated heat dissipation structure design, the light body heat dissipation design, fully cover the temperature is low, safety, good protective, heat dissipation structure first runner design, than the average 80% increase the cooling area structure, the cooling speed increased by 50%, to ensure the LED luminous efficiency and the service life of lamps and lanterns

5, the lamp body USES the high die casting aluminum or a thickness of 1.5 mm 304 # stainless steel stamping, the lamp body without aperture, delicate and beautiful, radiation capability is strong, the surface anti-aging electrostatic pensu processing, consecrated themselves, corrosion resistance is strong, waterproof effect is good.

(1) bottom outlet: the led line lights at the bottom line are divided into two types: the hidden line and the non-hidden line.

Qualification to hide the line of led waterproof outdoor line at the bottom of the lamp can hide the butt plug at the bottom of the lamp body, we put the hidden line of led outdoor waterproof lamp line shape is called: "lights" H lines. In addition to the good effect of the hidden line, its obvious advantage is to realize the seamless connection. There is no gap between the lamp and the lamp, and the lighting effect is consistent with no breakpoint defect.

The bottom line of the led lamp line not Tibet line, the general use of U type card buckle installation, and H hidden line structure, its installation is more convenient, is also a seamless docking, direct type connector, plug and play.

(2) plug wire (line) of bilateral: plug wire ends there is no doubt that is led lamp line manufacturer plug line, plug line of led waterproof outdoor line at the bottom of the lamp and hidden line and side line is different, docking between light and the light will exist when installation gap of about 1 cm, in the practical application of rope, 1 cm spacing will not have much influence on the overall lighting effect, because the light beam is scattered can fill the missing parts.

(3) lateral line: for led outdoor waterproof line light, generally for the two way of lamps and lanterns, the bottom of the lamp body has a similar characteristics: level off, smooth, can install viscose. Choose the side outlet can also achieve seamless docking, but this way with relatively few side, in addition to the special requirements, common way of qualification is given priority to with hidden lines and plug at the bottom of the outlet.