1.Outdoor installation

The outdoor installation of led line lamp is more emphasis on the waterproof and installation of the lamp. This installation led lamp line, mainly due to the led line will withstand wind rain, if use 3 m glue is fixed, a long period of time can cause 3 m adhesive will reduce in the led lamp line loss, outdoor installation often adopt the way of fixed card slot, shear and connection are needed, and indoor installation, just need additionally equipped with waterproof glue, in order to consolidate the join waterproof effect. Then use the special fixed clip fixed, can use the electric hammer to punch the eye or use plastic expansion tube with screws to fix the clip.

2. Indoor installation

Led lamp line used for interior decoration, the installation is very simple, we wholesale each led lamp on the back of the line with the self-adhesive strong 3 m double-sided adhesive, can be directly to tear when installation to 3 m double-sided adhesive stickers on the surface of the article and then the lights need to install at a fixed place, with his hands pressed flat. Led lamp line is a group of three led lights, circuit structure consisting of a series parallel way, every 3 led lamp bead, cut that can be used alone, how long you need to use, can cut just go, but need to pay attention to the bonding pad.

3. Wiring method

The general voltage of the led line lamp is AC220V, DC12V and DC24V. Therefore, it is necessary to select the appropriate switching power supply, and the power supply is determined according to the power and connection length of the led light bar. It is important to note that the DC12V and DC24V can not be connected to AC220V, otherwise the beads will burn out. DC12V also cannot be connected to the control power of DC24V; Otherwise, the power will more than double, and it is easy to burn the beads. The AC220V light belt is directly connected to the city power. The RGB 7-color led lamp belt needs to use the controller to realize the changing effect. It is generally used to distinguish the black, red, green and blue from the four lines. The light bars of the seven colors are generally in the common anode, which is the one on the lamp bar is +12V connecting the black line, the other is the negative pole, and the RGB access corresponds to the red and green blue interface or the power line.

4. Connection distance

Generally speaking, led line lights have a maximum connection distance of 20 meters and a 5050 series of led light belts. The longest connection distance is 15 meters. If the connection distance is exceeded, the led line lamp is very easy to heat, which will affect the service life of the led line lamp in the process. The control distance of RGB simple controller is 10 to 15 meters. The control distance of the remote control controller is 15 to 20 meters, and the maximum distance can be controlled to 30 meters. If the connection distance of the led line lamp is longer, and the controller cannot control the long lamp strip, then the power amplifier needs to be used for tapping. Therefore, the installation must be installed according to the manufacturer's requirements.